Mini tensioner

Roller structures

When transporting cable either in fabrication/storage facilities or when installing land cable, roller paths are often used to avoid cable sliding on the ground. For simple straight distances, rollers are often put directly on the floor.

For more complex cable paths which includes bends in vertical or horizontal direction, roller windows are used to guide the cable correctly. These roller windows must be installed with correct location and spacing between to not overstress or overbend the cable. Layback roller structures will be designed for your specific project.

Contact BEIN Engineering and our Cable Engineers will calculate and design the correct roller structures based on pulling forces, cable bending radius and acceptable point loads on the cable.

    Contact Us

    If any questions please contact us and we will be strive to give you a quick feedback. (* = required field)