Our standard products –
Layback can also design custom equipment for your project.

Bellmouth
Laybacks latest bellmouth design have a submerged weight of only 20kg which makes it very easy to install.
View product
Bellmouth
Layback retrofitted diving and ROV-operated cable funnels, so-called Bellmouths are designed to be mounted on the end of pull in pipes to provide guidance and protection during cable installation.
View product
Cable anchor
Layback Cable anchor is a smart mechanical anchor which can be used to anchor subsea cables in axial direction.
View product
Cable extrusion
Layback can offer continuous extrusion onto cables or umbilicals from Parmaplast.
View product
Cable protection
Layback can offer good quality cable protection produced by Parmaplast for additional wear resistance and shock absorbance.
View product
Layback 250t carousel
The Layback 250t carousel can easily be disassembled and stored in two 20ft containers which makes road transport easy in any port.
View product
Cable Carousel
Our current design can store 2000 tonnes of cable, but also smaller and bigger carousels can be designed on request.
View product
Cobra bend restrictor
Layback bend restrictor is a clever and simpler way of making bend restrictors compared to conventional bend restrictors
View product
Mini Tensioner
Layback Mini Tensioner is a handy portable tensioner designed for pulling operations in the field.
View product
Medium Tensioner
The Layback medium tensioner is a modular cable tensioner with one tonne pulling capacity per wheel pair.
View product
Maxi Tensioner
The Layback Maxi Tensioner is developed of harsh offshore conditions and have a pulling capacity of 25 tonne.
View product
Reels
We can deliver reels which satisfies your requirements, be it weight, capacity, and cable minimum bending radius.
View product
Roller bow for excavator
Layback Roller Bow for Excavator is designed to replace the grab on a standard excavator. It is therefore very flexible in use as the excavator can hold it in many different locations during the installation.
View product
Cable Lifter
The cable lifter has an integrated tensioner and is mounted on an excavator. It lifts the cable onto the cable shelves while the excavator slowly drives backwards
View product
Thrusswork for cable cleats
When routing cables in difficult places where cables are curving in both vertical and horizontal direction, traditional cable racks might not be feasible.
View product
Turnpoint anchor
Layback Turnpoint Anchor can be pre-positioned on seabed for the laying vessel to lay the cable around. After the cable is laid, the turnpoint anchor can be removed.
View product
Power Quadrant
The power quadrant is normally lifted by a crane and used to transport cable from one location to the next where great height is required.
View product
Quadrant
The Layback Quadrants are used for offshore pull in operations. It can be delivered both preassembled but also in boxes or containers for assembling on site, depending on your requirements
View product
Cable Chute
Cable chutes are often used on cable lay vessels for cable departure, but also for umbilical’s, winch wires, ropes or similar to be routed over the stern or vessel side
View product
Portable Cable Carousel
Conventional cable carousels must be transported by crane lift, multiwheelers or similar. Layback Portable Cable Carousel has a chassis with rubber belts that can move the cable around
View product
Customized product
If you cannot find the product you need for your specific project, please contact us and our cable engineers at BEIN Engineering will design the equipment you need.
View product